Samsung HW-T550 - Page 14

3. Press and hold the Up button on the remote control for at least 5 seconds.
• The ID SET message appears on the display of the Sound bar for a moment, and then it
disappears.
• The Sound bar will automatically power on when ID SET is complete.
SAMSUNG logo is on the top
...
IDSET
~CAUTION
• If your Sound bar was playing music when it connects to the SWA-8500S, you may hear some
stuttering from the woofer as the connection finalizes.
4. Check if the LINK LED is solid blue (connection complete).
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Sound bar and the
Wireless Receiver Module.
5. If the SWA-8500S is not connected, repeat the procedure from Step 2.
ENG-8