Samsung IAC 130 2K

61
Preset Timing Modes
"
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
"
IAB 146 4K
When Input Signal Plus is set to On, up to the 3840 x 2160 @ 60 Hz resolution is supported.
When Input Signal Plus is set to Off, up to the 3840 x 2160 @ 30 Hz resolution is supported.
- This function may not be supported depending on the model.
Model Name IAB 146 4K / IAB 110 2K / IAB 146 2K / IAC 130 2K
Synchronization
Horizontal Frequency
30 ~ 135 kHz (DP), 15 ~ 135 kHz (HDMI 1~3)
Vertical Frequency
30 ~ 120 Hz (DP), 24 ~ 120 kHz (HDMI 1~3)
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power indicator on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
IAB 146 4K
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
HDMI 1~3 DP
IBM/VESA, 640 x 480 31.469 59.940 21.175 N / N O O
Mac, 640 x 480 35.000 66.667 30.240 N / N O O
VESA 640 x 480 37.861 72.809 31.500 N / N O O
VESA, 640 x 480 37.500 75.000 31.500 N / N O O
IBM, 720 x 400 31.469 70.087 28.322 N / P O O
VESA, 800 x 600 37.879 60.317 40.000 P / P O O
VESA, 800 x 600 48.077 72.188 50.000 P / P O O
"
Horizontal Frequency
The time required to scan a single
line from the left to the right side
of the screen is called a horizontal
cycle. The reciprocal number of a
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
"
Vertical Frequency
The product displays a single image
multiple times per second (like a

the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.