Need help?Do you have a question about the Samsung IWA Series and is the answer not in the manual?
Details product specifications for the IWA series, including resolutions and power.
Details product specifications for the IFA series, including resolutions and power.
Outlines the various types and configurations of frame kits available for installation.
Provides information on the physical characteristics and product details of cabinets.
Essential safety guidelines to prevent damage to LED modules during installation.
Explains installation conditions and guidelines related to radiant heat management.
Provides guidance on calculating airflow and selecting appropriate fans for cooling.
Describes specific installation requirements for vertical wall mounting without fans.
Details installation procedures for recessed mounting without fans.
Outlines installation requirements for vertical wall mounting with fans.
Describes installation procedures for recessed mounting with fans.
Provides important notes and considerations for recessed installation scenarios.
Explains the specific procedures for duplex installation configurations.
Lists the necessary preparations and items required before starting installation.
Details the accessories that are included or required for cabinet installation.
Highlights unique features and configurations for IWA/IFA screen models.
Provides a detailed explanation of the docking connection process between units.
Offers troubleshooting steps for mechanical errors related to docking connections.
Provides troubleshooting steps for circuit-related errors in docking connections.
Explains cable connection methods based on their specific locations in the setup.
Lists essential steps and checks to perform before installing the cabinet.
Addresses solutions for module warpage and provides guidance on Z-axis adjustment.
Outlines the sequence for installing the frame and then the cabinet.
Details critical precautions to follow when fastening screws during frame installation.
Provides reference instructions for correcting gaps between the frame and the wall.
Explains the structural assembly process for cabinet and frame installation.
Lists preparatory tasks required before proceeding with cabinet installation.
Specific instructions for installing cabinets for the IWA P1.26 model.
Provides a guide for installing large-scale LED screens (8x8 or larger).
Outlines additional assembly operations for the bezel after initial confirmation.
Step-by-step instructions for installing the frame bezel components.
Explains how to perform extension installations for the frame bezel.
Details the connection procedures for the SNOWAAE model S-Box.
Specifies connection requirements for S-BOX IG and Bridge components.
Guides on configuring IG settings based on the screen setup.
Provides instructions for connecting optical cables for data transmission.
Explains how to connect the 24V power adaptor to the S-Box.
Details panel configuration steps for S-Box connections.
Instructions on how to group S-Boxes for display management.
Guides on setting the correct input resolution on the PC for optimal display.
Lists supported frequencies for S-Box grouping configurations.
Describes how to adjust picture settings within the S-Box menu.
Explains how to enable and use the simple wall mode feature.
Details AC power daisy-chaining and power consumption across different models.
Explains how to set up Multi S-BOX connections for redundancy.
Guides on DIP settings for cable-less 4K screens with S-Box redundancy.
Details DIP settings for 4K pillar screens with S-Box redundancy.
Covers DIP settings for 4K screens with data redundancy in cable-less setups.
Explains IG DIP settings for normal OCM cable connections with S-BOX redundancy.
Guides on DIP settings for single-level installations using cable-only connections.
Provides setup instructions based on installation type for IWA and SBB-SNOWAAE.
Details connection configurations based on screen resolutions for the IWA model.
Details connection configurations based on screen resolutions for the IFA model.
Instructions for using the control program for PC.
Explains how to perform dehumidification using the control program.
Describes how to use the test pattern function within the control program.
Details how to enable and manage advanced power modes.
Instructions for updating the software on the LED cabinet.
Guides on how to update the software for the S-Box.
Key precautions for installing S-Boxes, covering ventilation and spacing.
Specific connection instructions for the SNOWJ*U S-Box model.
Explains how to use the Multi Link HDR function with S-Boxes.
Instructions for updating FPGA firmware using Multi Link HDR Cable.
Provides information on optical cable loss based on mating grade and cable types.
An overview of the multiview function and its capabilities.
Details on how to configure the layout for multiview display.
Instructions on how to save custom layout configurations.
Steps for setting up a 4 HDMI borderless layout.
General instructions for setting up a 4 HDMI display configuration.
To Next Page
General