LED R&D Lab(VD)
127
8. S-Box Installation and Connection
Home → Video Wall : OFF → On
[Caution]
1) Before executing S-Box Grouping in LSM (LED Signage Manager), be sure to set the resolution of the input
source device to the resolution supported by S-Box Grouping. ※When S-Box Grouping, LED Picture size = FHD
cannot be used
2) When inputting an unsupported resolution, the screen may not be visible or noise may occur on the screen.
Turn off the Video Wall function and change the frequency of the video output source to 50Hz or 60Hz.
※'After 13.06, the S-Box Grouping function is provided through LSM. Check the latest version of LSM.
• S-Box Connection (Panel Configuration)
② S-Box Connection (Grouping)
To Next Page
Loading...
