LED R&D Lab(VD)
193
10. Settings / How to Use
1. Prepare software file to be updated. (The file in the red box will be selected for software update.)
2. Click button in S-Box settings
3. Choose prepared file by clicking button.
4. Choose S-Box to be updated from the list, and click
The version of the selected file is lower than
or equal to the current software version of
S-Box.
Please prepare a higher version of the file.
The version name (version TAG) of the selected
file does not match the software version name
of the current S-Box.
Please prepare the correct file.
The info.txt file does not exist.
Please check the file.
10-2. Software Update – S-Box
To Next Page
Loading...
