Samsung IWA Series - 10. Settings; How to Use

LED R&D Lab(VD)
198
10-2. SW update – S-Box
4) Valens TX/RX upgrade
(You can upgrade your Valens TX/RX in Factory Mode. It takes about 20 minutes.)
1. Save the “TB-VSTXSHWWS.bin” and “TB-VSRXSHWWS.bin” files to the USB root.
2. Connect USB.
3. Enter the factory mode.
4. Select the “SVC → UPGRADE” menu.
5. Move the cursor to the “VALENS UPGRADE” menu.
6. Click the Enter button.
7. Press the ‘▶’ button on the remote control to start the upgrade.
10. Settings / How to Use
② Update via USB