LED R&D Lab(VD)
100
10. Using two M3, L5 screws each, fasten it to the frame bezel top boot. (Fig. 1)
* When a gap occurs in the middle of the bezel, attach a sheet bezel so that the gap is not visible
from the front. (Depending on the degree of separation, the number of sheet bezels is successively
added to complement.)
11. Using 6 M4, L8 screws, connect the frame bezel top bottom and the top hole of the cabinet
(Fig. 2).
M4,L8
[Fig.1]
[Fig.2]
M3,L5
Sheet Bezel
7. Frame Bezel installation
◇ Bezel installation
To Next Page
Loading...
