LED R&D Lab(VD)
18
◇ Caution for cleaning screen ( ※ IWA Only )
18
- It is recommended to wipe with a soft cleaning cloth
provided with the product. If there is a contamination area
that is not removed well, a small amount of glass detergent
of the surfactant component is sprayed on the cleaning cloth
provided. (However, do not spray the glass detergent directly
on the screen)
- Hard stuff on screen surface can damage LED chip and film
during cleaning.
Clear screen surface before cleaning
- Watch out for damage when cleaning gap between Half-
Cabinets
- Watch out for damage when cleaning gap between Modules
- Do not insert any cleaning tool or spay cleaner directly into
the gap
- Do not wipe the LED surface with hard materials such as paper
towels, brushes comb or brush, acrylic or steel.
- Do not use chemicals such as wax, benzene, thinner, mosquito
repellent, air freshener, lubricant, and detergent in products
★Caution★
1. Product Information and Installation Precautions
To Next Page
Loading...
