LED R&D Lab(VD)
26
• Duplex installation
If the flow rate is indicated on the flow calculation site, it is necessary to install a fan and air
conditioner.
Minimum separation distance from wall 30mm or more (Aperture ratio 100%)
If Aperture ratio is not 100%, Separation Distance =
Minimum Separation Distance
Aperture ratio(%) / 100
• When installing inclined
Same as general installation at an angle of 30° or less
Angle 30° or less
WALL
At least 30 mm
WALL
At least 30 mm
1. Product Information and Installation Precautions
To Next Page
Loading...
