Samsung IWA Series - S-Box Connection (Panel Configuration)

LED R&D Lab(VD)
126
8. S-Box Installation and Connection
• S-Box Connection (Panel Configuration)
① S-Box Default Picture Setting
• The default picture configurations are optimized for LH015IFH in Samsung factory.
• The picture configurations will be configured automatically when you finish the installation.
• For the best picture quality, Please connect S-Box and LED displays via LSM software properly.
• The 1
st
LED Display(I/G) must be connected to HDBT port #1 in S-Box
• The Picture configuration will be set base on the model of the 1
st
Master LED display which is connected to HDBT port #1 in S-Box.
* If the S-Box and LED Displays are not connected properly by LSM, the picture quality might not be correct.
<Connected condition in LSM>
컨트롤 PC
(LSM)
S-Box
Ethernet
Interface Gender
Vx1
……………
Optical (IWA)
HDBT (IFA)
OCM Cable
(Vx1, Ethernet)
Cabinet 1
(Master)
Cabinet N