Samsung IWA Series - 4. Frame installation

LED R&D Lab(VD)
55
4. Frame installation
② ASSY FRAME H DOUBLE and SINGLE (different according to the 3X3/4X4/5X5 specification) are extended by using the
connected JOINT H
- Connect two FRAME H without screw, Pay attention to the guide engraving position. (Fig.1)
* The screw fastening is carried out in the next step.
- Extended by combining FRAME H according to the installation specifications, and the last JOINT H is used only for extended installation (Fig.2)
Fig.1 ASSY FRAME H extension
Note the guide position
+
+
+
+
X 2
X 2
X 2
Fig.2 ASSY FRAME H extension (changed according to the specification, when installing alone, the last JOINT H is separated)
3X3 : Double 2 + Single 2
4X4 : Double 4
5X5 : Double 4 + Single 2
ASSY FRAME H SINGLE(1
st
stage)
ASSY FRAME H DOUBLE(2
nd
stage)