Samsung IWA Series - 슬라이드 번호 125

LED R&D Lab(VD)
124
12
④ Instruction for handling Optical Cable
 Gently fix the optical cable to prevent direct compression when fixing it to Tray and so on.
 The clamp interval is recommended to be 1m or less for fixing.
 Compression properties depend on the structure and type of cable. Refer to cable specification.
 Do not shock the optical cable. In general, the impact load of the optical cable is below 7J, but the
impact characteristics refer to each cable specification.
 Do not twist the cable. If the cable is twisted, the optical cable can be damaged.
8. S-Box Installation and Connection
Clamp tightening
Tighten the clamp
properly
Fixed soft material
clamp
Fixing the excess
of cable
No Torsion