Samsung IWA Series - 4. Frame installation

LED R&D Lab(VD)
54
4. Frame installation
① ASSY FRAME VERTICAL (Same as 3X3/4X4/5X5) 1 Separate SET into FRAME VERTICAL L/R and HOLDER-MAGNET
VERTICAL(* Note that it is not ASSY FRAME VERTICAL IG) (Fig.1)
- After separating 10 connected screws, use it as a frame vertical L/R(Fig.2)
- The remaining HOLDER-MAGNET VERTICAL is used when installing the extension.(Fig.3)
Fig.1 Separation of ASSY FRAME MIDDLE
FRAME VERTICAL R
FRAME VERTICAL L
Fig.3 HOLDER MAGNET VERTICAL 1 EA is used for expansion installation
Fig.2 Placed at the left and right ends of the ASSY (check the engraving)
FRAME VERTICAL R
FRAME VERTICAL L
HOLDER-AMGNET
VERTICAL