LED R&D Lab(VD)
73
Fig.1 Bracket-Support Assembly Fig.2 Adjust with tanning bolts until it comes into contact with the partner.
② First-stage CABINETs assemble a separate bracket support at the bottom before installation.(Fig.1)
- When after installing up to 1 levels, it fixes the CABINET position by adjusting the tanning bolts assembled on the bracket support.(Fig.2)
※ Bracket Support is enclosed in Frame Kit.
※ The red points must be applied and the yellow points are selectively used according to the installation conditions.
Bracket Support
◇ CABINET installation (IWA P1.26)
[ UHD SCREEN (36Cabinet) ]
5. Cabinet + Frame installation
SCREW-MACHINE
(FH, M4, L8)
To Next Page
Loading...
