LED R&D Lab(VD)
77
5. Cabinet + Frame installation
※ Large screen installation guide (8x8 or more)
- Instead of horizontal installation, which is the conventional installation method, it proceeds with a step-by-step installation method.
- After installing the first stage and leveling it, stack it up to the top based on the first cabinet.
- If you need to adjust the z-axis step while installing the cabinet from the 2nd stage, remove the cabinet installed at the bottom of the next
cabinet, adjust it, and then reinstall it.(Fig.1)
* The reason for separating the cabinet is to facilitate movement between cabinets when adjusting the step difference.
LED
LED
LED 2 4 N
N+1
N+2
General screen installation method Fig.1 Large screen installation method
If adjustment is necessary as shown in the figure, work after removing the cabinet
조절이 필요한 포인트
To Next Page
Loading...
