63
ACCESSING YOUR MAILBOX
[Also known as Subscriber Services Menu]
Inside Callers [Subscriber logging in from their Desk]
• Dial the SVM/SVMi E-Series access number or press the key assigned
to ring SVM/SVMi E-Series [VMMSG].
• Enter your personal password when prompted (the default password is
0000).
Outside Callers [Subscribers calling from Cell Phones or outside of
the office environment]
• Dial the phone number that will be answered by the SVM/SVMi E-Series.
The main greeting will answer.
• At the main greeting dial [#] plus your Subscriber (or mailbox) number
(Subscriber and Mailbox numbers will usually match your extension
number).
• Enter your personal password when prompted (the default password is
0000).
Access your Subscriber Services (or Mailbox) from a
Station other than your Own (or checking a mailbox associ-
ated with a different station)
• Press the [VMMSG] key or dial the SVM/SVMi E-Series group number.
You will be prompted to enter a password.
• Press [4]. This will take you to the Main Auto Attendant Menu.
• Press [#] plus the Subscriber number of your choice. You will be
prompted to enter you password.
At this point the inside and outside callers follow the same instructions. You
will hear a message stating the number of messages left in your mailbox.
You will then hear the Subscriber Services Menu with the following options:
1 Listen to New Messages - See Listening to your Message.
2 Record and Send Message - See Sending Messages.
3 Review Saved Messages - See Listening to your Message.
4 Access Manager - See Access Manager.
5 Personal Greetings - See Personal Greetings.
6 Mailbox Administration - See Mailbox Administration.
# Personal Services - See Personal Services.
4 Return to Main Menu.
idcs100_falcon.qxd 10/20/2004 12:43 PM Page 69
To Next Page
Loading...
