Samsung iDCS 500 Technical Manual

TABLE OF CONTENTS
INSTALLATION SECTION
PART DESCRIPTION PAGE
1 SITE REQUIREMENTS............................................................................1.1
2 INSTALLING SINGLE CABINET
AND MULTIPLE CABINET CONFIGURATIONS
2.1 UNPACKING AND INSPECTION ................................................ 2.1
2.2 SINGLE CABINET INSTALLATION–WALL OR FLOOR MOUNT . 2.1
2.3 TWO CABINET INSTALLATION–FLOOR MOUNT ....................... 2.2
2.4 THREE CABINET INSTALLATION–FLOOR MOUNT ................... 2.3
2.5 ADDING AN iDCS 500 EXPANSION CABINET ........................... 2.4
2.6 RACK MOUNTING AN iDCS 500 CABINET ................................ 2.4
2.7 GROUNDING .............................................................................. 2.5
2.8 POWER CONNECTIONS ............................................................ 2.7
2.9 MDF CABLING ............................................................................ 2.8
3 INSTALLING PRINTED CIRCUIT CARDS
3.1 MCP2 CARD ............................................................................... 3.1
3.2 SCP2 CARD ................................................................................ 3.5
3.3 LCP2 CARD ................................................................................ 3.6
3.4 ESM BOARD ............................................................................... 3.7
3.5 MISC BOARD .............................................................................. 3.7
3.6 SCM BOARD............................................................................... 3.7
3.7 MFM BOARD ON PROCESSOR CARD ...................................... 3.8
3.8 RCM BOARD .............................................................................. 3.8
3.9 MODEM BOARD ......................................................................... 3.9
3.10 IOM BOARD ................................................................................ 3.9
3.11 TRUNK B CARD.......................................................................... 3.9
3.12 TRUNK B1 CARD........................................................................ 3.9
iDCS 500 Release 2 / OfficeServ INSTALLATION
TECHNICAL MANUAL TABLE OF CONTENTS MARCH 2004
Home Page
Table of Contents

Samsung iDCS 500 Specifications

General

Power Supply	AC 100-240V, 50/60Hz
Humidity	10% to 90% non-condensing
Expansion	Expandable using expansion modules
Features	Caller ID
Compatibility	Samsung digital telephones
Operating Temperature	0°C to 40°C (32°F to 104°F)