8
Preparations
Chapter 02
Ports
"
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
POWER
IN
SERVICE SERVICESWITCH DATA OUT
SERVICE DATA IN SWITCH SERVICE MODE 1/MODE 2
POWER
OUT
100-240V
50/60Hz 4.0A
SERVICE SWITCH SERVICE
SERVICE SWITCH
SERVICE
POWER IN
POWER OUT
100-240V
50/60Hz 4.0A
DATA IN
DATA OUTMODE 1/MODE 2
STB
Parts Description
SERVICE
Dedicated to service technicians.
DATA IN
Connects to the DATA OUT port on an interface gender or on the
previous cabinet to receive video data.
SWITCH
Enters factory mode (press and hold for 5 seconds) or factory reset
mode (press and hold for 10 seconds).
MODE 1/MODE 2
Specify the monitor mode:
• MODE 1: Standby mode (STB: Stand-By)
• MODE 2: Operating mode (O: Operating)
DATA OUT
Connects to the DATA IN port on the next cabinet.
POWER IN
Connects to an AC power.
POWER OUT
Connects the power cable to the next cabinet to support AC power.
To Next Page
Loading...
