If malicious code is detected...
If malicious code is found, the results of the scan will appear on the screen. This result window
displays all malicious code found. You can either quarantine the code or isolate it to continue to run.
1.
Select all the malicious code you want to either quarantine or block.
2.
Select Isolate or Block. These options relocate the selected malicious code to the Isolated List or
Blocked List.
"
The Isolated List displays all quarantined malicious codes.
"
The Blocked List displays all blocked malicious codes. You can also quarantine or allow codes from
this list.
Configuring additional functions
(MENU/123) MENU System Smart Security Settings
Try Now
●
Antivirus
Monitors the TV in real-time to prevent viruses from infecting the TV.
●
Network Security
Protects the TV from hacking to minimise a leaks of private information.
●
Camera
Permits the cameras connected to the TV to be used.
●
Microphone
Permits the microphones connected to the TV to be used.
●
Auto Scan
Makes the TV automatically scan itself and connected storage media when it is turned on.
●
Auto Isolate
Adds malicious codes found during the scanning process to the Isolated List automatically.
To Next Page
Loading...
Need help?
General