Samsung KM24A - System

40
System
2nd 3rd Description
Accessibility High Contrast Set the background and font to high-contrast colours in Menu. Menu transparencies become opaque when the option is
selected.
Enlarge Enlarge the size of the Menu area.
Start Setup Go through the initial setup steps like you did the first time you used this product.
"
Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”.
If you want to change the PIN number, use the Change PIN function.
"
Change the PIN to keep your device secure.
Time Configure various time-related settings.
Clock Set Select Clock Set. Tap Date or Time.
Tap the ▲ or ▼ button to set the Month/Day/Year
"
You can tap any numbers of the date and time to open the number pad and enter the numbers directly from it.
NTP Settings Set up the server URL and time zone to use the network time.
DST Switches the DST (Daylight Saving Time) function on or off.
"
Start Date, End Date and Time Offset are enabled only when DST is set to On.
Power On Delay When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range
0–50 seconds).
Power Control Auto Power On This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
Max. Power Saving Conserve power by turning off PC monitor when PC is not used for certain time.
"
This function may not be supported depending on the model.
Standby Control When no signal is detected, it determines whether or not to enter sleep mode.
"
This function may not be supported depending on the model.
Remote Configuration This feature keeps the network power on when the product turns off.