English - 4
Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent
stand.
Using the Stand-Base
Two or more people should carry the PDP. Never lay the PDP on the oor
because of possible damage to the screen. Always keep the PDP upright.
The PDP can rotate 20 degrees in right and left directions.
N
N
-20° ~ 20°
Checking Parts
Owner’s Instructions Remote Control/
AAA Batteries (2ea)
Power Cord Cloth-Clean
Warranty Card/
Safety Guide Manual
(Not available in all locations)
Ferrite Core for
Power Cord
Ferrite Core for
Headphone
Ferrite Core for
Power Cord
(PS63B680T only)
Cover-Bottom
(PS50B650S only)
(Refer to page 69)
Cover-Bottom / Screws (2ea)
(PS58B680T / PS63B680T only)
(Refer to page 69)
Screw (4ea)
(PS50B650S only)
(Refer to page 69)
Holder-Ring (4ea)
(Refer to page 69)
Holder-Wire Cable Program CD
Ferrite Core
The ferrite cores are used to shield the cables from interference.When connecting a
cable, open the ferrite core and clip it around the cable near the plug.
N
Connecting and Preparing Your TV
(PS63B680T only)
BN68-02113C-Eng.indb 4 2009-04-09 오후 3:47:39
To Next Page
Loading...
Need help?
General