Samsung LED 4500 Series - Transfer Channel List; Delete CAM Operator Profile

16
Channel mode
●
P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●
C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Transfer Channel List
Screen Menu > Broadcasting > Channel Settings > Transfer Channel List
Try Now
Imports or exports the channel map.
"
You should connect USB storage to use this function.
"
The PIN input screen appears. Enter the PIN using your remote.
●
Import from USB: Import channel list from USB.
Try Now
●
Export to USB: Export channel list to USB. This function is available when USB is connected.
Try
Now
Delete CAM Operator Profile
Screen Menu > Broadcasting > Channel Settings > Delete CAM Operator Profile
Try Now
Select the CAM operator to delete.