Scanning for Satellite Channels
Screen Menu > Broadcasting > Channel Settings > Manual Tuning
Press Scan after setting the items below.
●
Transponder
Selects the transponder.
●
Scan Mode
Selects either free or all channels to store.
●
Network Search
Enable / Disable network search.
●
Signal Quality
Display the current status of broadcasting signal.
●
Network Name
This displays the name of the network that is found.
"
Information on a satellite and its transponder is subject to change depending on the broadcasting
conditions.
"
When setting is completed, move to Search. Channel scan is started.
To Next Page
Loading...
