Using the Universal Remote Control
By configuring the universal remote control feature for a connector to which an external device is
already connected, you can use the Smart Touch Control as a universal remote control simply by
sending the input signals to the corresponding connector.
Registered External Device Management
From the Universal remote setup screen, select a registered external device. The following options are
available:
●
Source Setup
Change the TV's input connector that the external device is connected to.
●
Synced Power Off
Configure the external device to turn off when the TV is turned off.
●
Rename
Rename the registered external device (up to 15 characters long).
●
Delete
Remove the registered external device.
To Next Page
Loading...
