English - 24
Adjusting the Color Tone
1. Press the MENU button to display the menu.
Press the ENTER
button to select "Picture"
2. 3UHVVWKHŸRUźEXWWRQWRVHOHFW&RORU7RQHWKHQSUHVVWKHENTER
button.
3. 3UHVVWKHŸRUźEXWWRQWRVHOHFW&RRO&RRO1RUPDO:DUP
or "Warm2".
Press the ENTER button.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2
cannot be selected. Movie mode is only available.
This function is available in PC mode.
Resetting the Picture Settings to the Factory Defaults
1. 3UHVVWKHŸRUźEXWWRQWRVHOHFW5HVHWWKHQSUHVVWKHENTER
button.
3UHVV WKHŸRUźEXWWRQWRVHOHFW³2.´RU³&DQFHO´WKHQSUHVVWKHENTER button.
Press the EXIT button to exit.
Each mode can be reset.
Move Enter Return
PictureTV
Ÿ0RUH
Color Tone : Cool1
Detail
ed settings
Size : 16 : 9
Digital NR : Auto
Active Color : On
DNIe : Off
Reset
: Cancel
Cool2
Cool1
Normal
Warm1
Warm2
Move Enter Return
Ÿ0RUH
Color Tone : Cool1
Ź
Detailed settings
Ź
Size : 16 : 9
Ź
Digital NR : Auto
Ź
Active Color : On
Ź
DNIe : Off
Ź
Reset
: Cancel Ź
PictureTV
Move Enter Return
Mode : Dynamic
Ź
Contrast 100
Brightness 50
Sharpness 85
Color 55
Tint G 50 R 50
Backlight 10
ź0RUH
PictureTV
Activating Backlight
1. Press the MENU button to display the menu.
Press the ENTER
button to select “Picture”.
2. Press the ŸRUź button to select “Backlight”, then press the ENTER button.
3. Press the ŻRUŹ button to decrease or increase the value
of the
backlight brightness.
Press the ENTER button.
Press the EXIT button to exit.
You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)
10
Backlight
Move Adjust Return
You can change the color of the entire screen according to your preference.
Move Enter Return
Ÿ0RUH
Color Tone : Cool1
Ź
Detailed settings
Ź
Size : 16 : 9
Ź
Digital NR : Auto
Ź
Active Color : On
Ź
DNIe : Off
Ź
Reset
: Cancel Ź
PictureTV
Move Enter Return
Ÿ0RUH
Color Tone : Cool1
Detailed settings
Size : 16 : 9
Digital NR : Auto
Active Color : On
DNIe
Reset
: Cancel
PictureTV
OK
Cancel