EasyManua.ls Logo

Samsung LN32A610A1R - Picture Control: Special Modes and Reset; Setting Movie Plus Mode; Setting Blue Only Mode

Samsung LN32A610A1R
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 24
Setting the Movie Plus
The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
1.
Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 21)
2.
Press the or button to select “Movie Plus”, then press the ENTER
button.
3. Press the or button to select “Off”, “Low”, “Medium”, “High” or “Demo”, then
press the ENTER
button. Press the EXIT button to exit.
This function is not available in “Wide Zoom” and “Zoom” modes.
It is not supported in HDMI1080p/24Hz, 25Hz, 30Hz mode.
Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the blue signal
only by removing the red and green signals from the video signal so as to provide a Blue
Filter effect that is used to adjust the Color and Tint of video equipment such as DVD
players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1. Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 21).
2. Press the ▲ or button to select "Blue Only Mode", then press the ENTER
button.
3. Press the ▲ or button to select "Off" or "On", then press the ENTER
button.
Press the
EXIT button to exit.
“Blue Only Mode” is available when the picture mode is set to “Movie” or
“Standard”.
Resetting the Picture Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the ENTER
button, to select “Picture”.
2.
Press the or button to select "Reset", then press the ENTER
button.
Press the or button to select “OK” or “Cancel” then press the ENTER button.
Press the EXIT button to exit.
Each mode can be reset.
Move Enter Return
ColorTone :Normal
Size :16:9
DigitalNR :Auto
DNle :Off
HDMIBlackLevel :Normal
Movie Plus
:Low
BlueOnlyMode :Off
Picture OptionsTV
Move Enter Return
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Movie Plus
: Low
Blue Only Mode : Off
Picture OptionsTV
Off
Low
Medium
High
Demo
Move Enter Return
Color Tone :Normal
Size :16:9
DigitalNR :Auto
DNle :Off
HDMIBlackLevel :Normal
Movie Plus
:Low
BlueOnlyMode :Off
Picture OptionsTV
Move Enter Return
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Movie Plus
: Low
Blue Only Mode : Off
Picture OptionsTV
Off
On
Move Enter Return
▲More
Picture Options
Reset : OK
PictureTV
OK
Cancel
BN68-01429G.indb 24 2008-05-29 ¿ÀÀü 9:31:16

Table of Contents

Related product manuals