English - 35
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.
The function also automatically ne-tunes the settings and adjusts the frequency values and positions.
This function does not work in DVI-Digital mode.
Preset: Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER
button.
Press the EXIT button to exit.
Easy Setting
1. Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select “Auto Adjustment”, then press the ENTER
button.
Setting up the TV with your PC
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
Preset: Press the SOURCE button to select PC mode.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Picture", then press the ENTER
button.
Press the ▲ or ▼ button to select "Screen", then press the ENTER
button.
2. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER
button.
Press the ◄ or ► button to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER
button.
Press the EXIT button to exit.
50
▲
Coarse
▼
Move Adjust Return
Auto Adjustment in progress
Please wait.
Move Enter Return
Coarse 50
Fine 0
Position ►
Image Reset ►
ScreenTV
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
PIP
Auto Adjustment
Move Enter Exit
Move Enter Return
Mode : Standard ►
Backlight 7
Contrast 95
Brightness 40
Sharpness 50
Auto Adjustment ►
Screen ►
Detailed Settings ►
▼More
PictureTV
Move Enter Return
Mode : Standard ►
Backlight 7
Contrast 95
Brightness 40
Sharpness 50
Auto Adjustment ►
Screen ►
Detailed Settings ►
▼More
PictureTV
To Next Page
Loading...
