English - 12
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently
1. Press the
POWER
button on the remote control.
The message "Start Plug & Play" is displayed with "OK" selected.
2. Press the ENTER button to enter the language.
Press the ▲ or ▼ buttons to select language, then press the ENTER
button.
The message “Select Home Mode when installing this TV at home.”
menu is automatically displayed.
3. Press the ◄ or ► buttons to select “Shop” or “Home”, then, press the ENTER button.
We recommend setting the TV to Home mode for the best picture in your home
environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop mode and you want to return to Dynamic
(Home) mode, press the Volume button and then hold down the MENU button
for five seconds on the side panel of the TV.
4. The message "Check antenna input." is displayed with "OK" selected.
Press the ENTER button.
5. Press the ▲ or ▼ buttons to select "Air", "STD", "HRC", or "IRC", then press
the ENTER button.
6. Press the ENTER button to select "Start". The TV will begin memorizing
all of the available channels.
To stop the search before it has finished, press the ENTER
button with
"Stop" selected.
7. Press the ENTER button. Press the ◄ or ► buttons to move to the
"Month", "Day", "Year", "Hour", "Minute" or "am/pm".
Set the "Month", "Day", "Year", "Hour", "Minute" or "am/pm" by pressing
the ▲ or ▼ buttons. Press the ENTER button.
(Refer to "Setting the Clock"on page 45)
You can set the month, day, year, hour, and minute directly by pressing the
number buttons on the remote control.
8. The message "Enjoy your watching." is displayed.
When you have finished, press the ENTER
button.
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the button on the front of the panel.
Operation
Language
Plug & Play
English
Français
Español
Português
Move Enter Skip
Check antenna input.
Plug & Play
Enter Skip
OK
Plug & Play
Air/Cable
Air
STD
HRC
IRC
Move Enter Skip
Plug & Play
Start Plug & Play.
OK
Enter Exit
Plug & Play
Clock Set
Hour Minute am/pm
12 00 am
Adjust Move Enter
Enjoy your watching.
OK
Plug & Play
Air 50
Stop
Enter Skip
Auto Program
Plug & Play
Home
Move Enter Skip
Select Home Mode
When installing this TV at home.
Shop
Month Day Year
01 01 2007
To Next Page
Loading...
