English - 22
Using Automatic Picture Settings
Your TV has three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, or Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Press the ENTER
button to select "Mode".
Press the ▲ or ▼ buttons to select the "Dynamic", "Standard", or "Movie" picture
setting. Press the ENTER
button.
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie for a natural Image without picture enhancements.
3. Press the ▲ or ▼ buttons to select "Contrast", "Brightness", "Sharpness",
"Color", or "Tint", then press the ENTER
button.
4. Press the ◄ or ► buttons to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ► button to increases it.
Press the ENTER
button.
Press the EXIT
button to exit.
• When in PC mode, Tint, Color and Sharpness are not available.
• Each adjusted setting will be stored separately according to its input mode.
• When you make changes to Contrast, Brightness, Sharpness, Color, Tint , OSD
will be also adjusted accordingly.
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
Picture Control
100
▲
Contrast
▼
Move Adjust Return
Move Enter Return
Mode : Dynamic
►
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50
R 50
Color Tone : Cool1
►
Detailed Settings
►
Backlight :10
►
▼More
PictureTV
Move Enter Return
Mode : Dynamic
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50
R 50
Color Tone : Cool1
Detailed Settings
Backlight : 10
▼More
PictureTV
Dynamic
Standard
Movie
Move Enter Return
Mode : Dynamic
►
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50
R 50
Color Tone : Cool1
►
Detailed Settings
►
Backlight : 10
►
▼More
PictureTV
To Next Page
Loading...
