English - 37
Resetting the Sound Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Sound", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Reset" then press the ENTER button.
Press the EXIT button to exit.
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the
equalizer setting to the factory defaults.
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing the other people in the room.
Connecting Headphones
When you insert the head set jack into the corresponding port, you can operate
only "SRS TS XT","MTS" and "Auto Volume" in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones
to the system.
The headphone volume and TV volume are adjusted differently.
Listening to the Sound of the Sub (PIP) Picture
1. Press the MENU button to display the menu.
Press the ▲ or ▼ buttons to select "Sound", then press the ENTER
button.
2. Press the ▲ or ▼ buttons to select "Sound Select",
then press the ENTER
button.
3. Press the ▲ or ▼ buttons to select "Main" or "Sub",
then press the ENTER
button.
Press the EXIT
button to exit.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
You can select this option when "PIP" is set to "On".
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
Mode : Custom ►
Equalizer
►
SRS TS XT : Off
►
MTS : Stereo ►
Auto Volume : Off
►
Internal Mute : Off
►
Sound Select : Main
►
Reset
SoundTV
Mode : Custom
Equalizer
SRS TS XT : Off
MTS : Stereo
Auto Volume : Off
Internal Mute : Off
Sound Select : Main
Reset
SoundTV
Main
Sub
Mode : Custom ►
Equalizer
►
SRS TS XT : Off
►
MTS : Stereo ►
Auto Volume : Off
►
Internal Mute : Off
►
Sound Select : Main ►
Reset
SoundTV
10
Volume
Move Enter Return
Move Enter Return
Move Enter Return
To Next Page
Loading...
