English - 27
Selecting a Signal Source (External A/V) for PIP.
3. Press the ▲ or ▼ buttons to select "Source", then press the ENTER
button.
Select the source of the sub picture (PIP) by pressing the ▲ or ▼ buttons and
press the ENTER
button.
The sub picture can serve different source selections based on what the main
picture is set to.
Changing the PIP Channel
4. Press the ▲ or ▼ buttons to select "Channel", then press the ENTER
button.
Press the ▲ or ▼ buttons to select the desired channel in the PIP window.
Press the ENTER
buttons.
The channel can be active when the sub picture is set to TV.
Press the SOURCE button on the remote control to select a signal from an external
source PIP
Press the CH buttons on the remote control to change the channels in the PIP
screen.
PIP : On
Source : HDMI1
Size :
Position :
Channel : Cable 3
PIPTV
PIP : On
Source : TV
Size :
Position :
Channel : Cable 3
PIPTV
▲
8
▼
Move Enter Return
Move Enter Return
TV
AV1
AV2
TV
Move Enter Return
Setup
▲More
Light Effect :
Watching Mode On
►
Wall-Mount Adjusment ►
Home Theater PC : Off ►
Energy Saving : Off ►
AV Color System : Auto ►
HDMI Black level : Low ►
PIP ►
Setup
Move Enter Return
TV
TV
Move Enter Return
Setup
▲More
Light Effect :
Watching Mode On
►
Wall-Mount Adjusment ►
Home Theater PC : Off ►
Energy Saving : Off ►
AV Color System : Auto ►
HDMI Black level : Low ►
PIP ►
Setup
Move Enter Return
TV
To Next Page
Loading...
