J
John FergusonAug 25, 2025
Why my Samsung LS32AM500NU won't power on?
- DDebra CastilloAug 25, 2025
Make sure that the power cord is correctly connected at both ends and that the remote control is operating normally.
Why my Samsung LS32AM500NU won't power on?
Make sure that the power cord is correctly connected at both ends and that the remote control is operating normally.
How to adjust screen brightness on Samsung LS32AM500NU Monitor?
Try adjusting the following settings first: Contrast, Brightness, Sharpness, Color, Tint (G/R).
How to resolve blurring or juddering on Samsung LS32AM500NU Monitor?
Use the Picture Clarity Settings function to resolve the issue.
How to fix blurry screen on Samsung LS32AM500NU?
Set the resolution and frequency to the recommended level.
How to stop my Samsung Monitor from flickering and dimming?
If your product is flickering or dimming sporadically, you may need to disable some of the energy efficiency features. Disable Ambient Light Detection, Power Saving Mode, Motion Lighting, or Contrast Enhancer.
How to fix poor color or brightness on Samsung Monitor?
Go to Picture and then adjust the Picture Mode, Brightness, Sharpness, and Color settings. See if Power Saving Mode has been enabled. Try resetting the picture.
Why is there no audio on my Samsung LS32AM500NU Monitor with HDMI?
If you are using an HDMI connection with your Samsung Monitor and there is video but no audio, check the audio output setting on your PC.
How to adjust Samsung Monitor screen brightness?
To adjust the screen brightness on your Samsung Monitor, navigate to Settings, then Picture, then Expert Settings, and adjust Contrast, Brightness, Sharpness, Color, and Tint (G/R).
Why is Samsung Monitor audio not playing through the AV receiver?
If your Samsung Monitor's audio isn't playing through the AV receiver, check the A/V receiver's power supply and settings.
What to do if my Samsung LS32AM500NU has problems powering on?
If your Samsung Monitor isn't powering on, ensure the power cord is securely connected at both the monitor and the power outlet. Also, verify that the remote control is functioning correctly.