▶ ◀ ▶
English
●
Position: Adjusts the picture position. Position is only available if Picture size
is set to Zoom1, Zoom2, Wide Fit, or Screen fit.
N
To use the Position function after selecting Zoom1, Zoom2 or Wide Fit, follow
these steps:
1. Press the
d
button to select Position.
2. Press the ENTER
E
button.
3. Press the
u
or
d
button to move the picture up or down.
4. When done, Press the ENTER
E
button.
N
If you want to reset the pictures to its original position, select Reset in the
Position screen, and then press ENTER
E
. The picture will be reset to its
default position.
To Next Page
Loading...
