◀ ▶ ◀
English
N
To use the Position function after selecting Screen Fit when connected to an
HDMI (1080i/1080p) or Component (1080i/1080p) source, follow these steps:
1. Press the
d
button to select Position.
2. Press the ENTER
E
button.
3. Press the
u
,
d
,
l
or
r
button to move the picture.
4. When done, Press the ENTER
E
button.
N
If you want to reset the pictures to its original position, select Reset in the
Position screen. The picture will be set to its default position.
To Next Page
Loading...
