Samsung MagicianDC - D [-Disk]

SSD DC 14
-d [--disk]
-d or --disk is used to input the physical disk index listed in the ‟L or --list command.
Arguments:
None
Used with:
--erase, --firmware-update, --trim, --overprovision, --smart, --benchmark, --info,
--sctcachestate
Usage:
magician --disk 1 --erase
magician --disk 1 --firmware-update --path <fwpackage-path>
magician --disk 1 --trim
magician --disk 1 --over-provision --set 25%
magician --disk 1 --smart
magician --disk 1 --setmax --set 123456
magician --disk 1 --writecache --set 1
magician --disk 1 --sctcachestate
magician --disk 1 --info
[or]
magician -d 1 ‟E
magician -d 1 -F -p <fwpackage-path>
magician -d 1 -T
magician -d 1 -O -s 25%
magician -d 1 -S
magician -d 1 -M -s 123456
magician -d 1 -W -s 1
magician -d 1 -X
magician -d 1 ‟I
※
Note: Arguments provided above are only for illustration purpose.
For SSDs directly connected to the system, the disk number should be inputted as “-d 0” and for RAID configuration “-d 2:0:1”, where
2 -Library type, 0 -Controller number, and 1 -disk number.