Samsung MagicianDC - Software Features and Usage; Features Overview

SSD DC 8
Features
This user guide describes the commands necessary to interact with Samsung SSD drives. The functionality includes:
Feature
Comments
List
Detect list of attached Samsung SSD Drives in the system
Firmware Update
Update the old firmware of the SSD to the new version
Erase
Erase data on the SSD by issuing an ATA Format Unit command
Overprovision
Resize the user capacity of the SSD
TRIM
Issue trim command to the SSD
S.M.A.R.T
Display smart information and log temperature of the connected
Samsung SSD drive, and estimate the lifetime of Samsung SSD
SET MAX
Set the maximum address of the Samsung SSD to change its user capacity
Write Cache
Enable/disable the write cache of the Samsung SSD
SCT Cache Status
Get SCT write cache state of the disk.
Disk Info
Display current overprovisioning value, current set max value, state of write cache etc. of
specified Samsung SSD
Command History
Display history of the previously executed commands
Help
Display the command line options
※
In LSI RAID Configuration, some features may not be executed.
The details are described in “Supported Commands for LSI RAID” table.