Samsung MagicianDC - Drive Operations and Management

SSD DC 16
-S [--smart]
Select a specific drive connected to the system and get the S.M.A.R.T information.
For example, if --disk X is specified, where X is the physical disk index, it lists down the SMART attributes of the disk X connected to
HOST system.
Also it is used to log temperature of the disk and estimate its life time.
Arguments:
-t [--temperature] Enables the user to log the temperature of the disk.
-a [--analyzer] Displays the lifetime estimation of the disk by SMART value.
--analyzer should be followed by either --start or --stop subcommands.
Used with:
--disk [or] -d
Usage:
magician --disk 1 --smart
magician --disk 1 --smart --temperature [Use default folder location]
magician --disk 1 --smart --temperature /home/ [Use /home/ folder
location] magician --disk 1 --smart --analyzer --start [Record the data
needed to
estimate the lifetime of SSD.]
magician --disk 1 --smart --analyzer --stop [Analysis the lifetime of the
SSD using recorded data.]
[or]
magician -d 1 -S
magician -d 1 -S -t [Use default folder location]
magician -d 1 -S -t /home/ [Use /home/ folder location]
magician -d 1 -S -a --start [Record the data needed to
estimate the lifetime of SSD.]
magician -d 1 -S -a --stop [Analysis the lifetime of the
SSD using recorded data.]
※
Note: Default folder location is /usr/local/Magician/SMARTFiles/. Temperature will be logged into a file “Log_Temperature.
txt” in default location if no valid file path is provided.
To estimate the lifetime of the SSD, first --analyzer should be run with --start and then with --stop subcommand. If “Wear
Leveling Count” of the SSD is the same when executing “--start” and “--stop” subcommands, then the lifetime will be
displayed as infinite.