Samsung MAX-L82 - Checking or Changing Programmed Tracks; Tuner; Searching for and Storing the Radio Stations

GB
14
You can check or change your selection of tracks at any time.
Press once if you have started listening to the selection.
Press Program.
Result: The following indications are displayed:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program.
Press Program again.
Result: The first track selected is displayed, together with the letter CH (Change).
Press Program one or more times until the track to be changed is displayed.
If necessary, press the corresponding Disc (1, 2, 3) button to change discs.
Press and or turn Moving Jog to select a different track.
Press Program to confirm your change.
Press CD ( ) to start listening to the selection.
Result:
The first track selected is played.
You can store up to:
15 FM stations
8 MW stations
7 LW stations
Switch the system on by pressing On/Standby.
Select the TUNER function by pressing TUNER.
Select the required frequency band by pressing TUNER (Band)
again on the front panel or TUNER (Band) on the remote control.
Result
: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
LW Long Wave
To search for a Press Preset/Manual on the front panel
station... or Tuning Mode on the remote control
Manually One or more times until MANUAL is
displayed.
Automatically One or more times until AUTO is
displayed.
Select the station to be stored by:
Turning the Moving Jog knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing Tuning or on the remote control
To scroll through the frequencies faster when searching
manually, hold down the Preset/Manual Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
Select the stereo or mono mode by pressing Mono/ST.
Checking or Changing Programmed
Tracks
1
2
3
4
5
6
7
8
Searching for and Storing the Radio
Stations
1
2
3
4
5
6
7
Deck 1/2
Repeat
VOL.
CD
Tuning
Mode
VOL.
CD
CD
Mono/ST. TUNER
Band
Program
/Set
Sound
Mode
AUX Disc Skip
Tape
CD
1
2,3,4,7
8
CD
CD
6
6
VOL.
CD
Tuning
Mode
VOL.
CD
CD
CD
5
5
Disc 1
On/
Standby
Timer/
Clock
PTY
RDS
AUX
Demo
Mute
Phones
Push Eject
Mono/ST
Band
TUNER CD TAPE
Power Surround
Program
CD Repeat
Shuffle
CD
Synchro
Reverse
Mode
Deck 1/2
Counter
Reset
Dubbing
Normal High
Preset
Memory
REC/Pause
Display
Disc 2 Disc 3 Disc Change
Open/Close
R
Vol um e
Sound
Mode
Push Eject
Enter
Up
D
o
w
n
Preset/Manual
Disc 1 Disc 2 Disc 3
CD
Preset/Manual
Tuning
Mode
4
1
On/
Standby
Timer/
Clock
PTY
RDS
AUX
Demo
Mute
Phones
Push Eject
Mono/ST
Band
TUNER CD TAPE
Power Surround
Program
CD Repeat
Shuffle
CD
Synchro
Reverse
Mode
Deck 1/2
Counter
Reset
Dubbing
Normal High
Preset
Memory
REC/Pause
Display
R
Vol um e
Sound
Mode
Push Eject
Enter
Up
D
o
w
n
Preset/Manual
TUNER
Preset/Manual
Vol um e
1
5
8
6
6
2,3,4,7
2,3
6
7
5
5
4