47
Connection Using an HDMI Cable
HDMI IN 1, HDMI IN 2, HDMI IN 3
Connection Using an DP Cable
•
Precautions for using DP
―
To increase the standby power capacity, the product stops DP
communication when it is turned off or in power-saving mode.
If the product in dual monitor mode is turned off or goes into power-
saving mode, monitor setting changes may not be updated.
As a result, screen output may not be displayed properly. In the occurrence
of this issue, set Max. Power Saving to Off before using the product.
―
Some graphics cards that are not compliant with the DP standard may
prevent the Windows Booting/Bios screen from being displayed when the
product is in power-saving mode. If this is the case, make sure to turn on
the product first before turning on your PC.
DP IN
To Next Page
Loading...
