G
gallowaymelissaAug 19, 2025
What to do if the Timer LED is on but my Samsung Air Conditioner won't turn on?
- Ccarrie31Aug 19, 2025
The timer is activated, and the unit is in ready mode. Cancel the timer operation for normal operation.
To Next PageTo Next PageWhat to do if the Timer LED is on but my Samsung Air Conditioner won't turn on?
The timer is activated, and the unit is in ready mode. Cancel the timer operation for normal operation.
Why doesn't my Samsung Air Conditioner cool when the room is hotter than the set temperature?
This can happen after a 3-minute delay when the compressor is re-operated, or when power is turned on.
What to do if the timer LED is lighting up but my Samsung Air Conditioner won't turn on?
If only the timer LED is lit and the air conditioner isn't operating, the unit should operate normally if the timer operation is cancelled.
What to do if my Samsung Air Conditioner's compressor stops intermittently in COOL or DRY mode, and the fan speed decreases?
The compressor might be stopping intermittently, or the indoor fan speed might be decreasing, to prevent the inside/outside air from freezing, depending on the inside/outside air temperature.
Why does my Samsung MH052FWEA Air Conditioner's compressor stop intermittently in DRY mode?
In DRY mode, the compressor operation is automatically controlled depending on the room temperature and humidity.
Why does the compressor and indoor fan stop intermittently in HEAT mode on my Samsung MH052FWEA?
To protect the compressor from overheated air in HEAT mode, the compressor and indoor fan will stop intermittently if the room temperature exceeds the set temperature.
Why do the indoor and outdoor fans stop intermittently in HEAT mode on my Samsung Air Conditioner?
In HEAT mode, the compressor operates in a reverse cycle to remove exterior ice. The indoor and outdoor fans do not operate intermittently for within 20% of the total heater operation.
Why is the compressor of the outdoor unit operating when my Samsung Air Conditioner is turned off in HEAT mode?
When the unit is turned off while de-ice is activated, the compressor continues operation for up to 12 minutes (maximum) until the deice is completed.
What to do if my Samsung MH052FWEA indoor and outdoor units do not operate properly?
Check the terminals to ensure the indoor and outdoor units are properly linked by the same number of cables and that the connecting position on the terminal is correct.
Why does my Samsung MH052FWEA Air Conditioner compressor stop and indoor fan stop intermittently in HEAT mode?
The compressor and indoor fan might stop intermittently if the room temperature exceeds the set temperature. This is to protect the compressor from overheated air when in HEAT mode.
General| Brand | Samsung |
|---|---|
| Model | MH052FWEA |
| Category | Air Conditioner |
| Language | English |
Safety guidelines for installing the air conditioner to prevent hazards like fire, water leakage, or electric shock.
Safety instructions for operating the unit, handling liquids, and proper disposal of the air conditioner.
Highlights key features like high efficiency operation, variable indoor unit combinations, and installation flexibility.
Identifies parts and provides specifications for MH****FPEA*/MH****VP2-** indoor units with diagrams.
Illustrates and labels components and specifications for various outdoor unit models.
Compares specifications, designs, and features across different Samsung air conditioner series.
Lists available accessories and optional components for indoor and outdoor units.
Lists error codes, explanations, and checking points for indoor unit troubleshooting.
Explains error codes and provides checks for outdoor unit troubleshooting.
Guides on setting options via remote control for various indoor unit models.
Lists option codes corresponding to various indoor unit models for configuration.
Steps for disassembling indoor unit components like front panel, PCB, motor, and heat exchanger.
Disassembly steps for Silhouette and Slim Duct indoor units, including filter-pre and blower.
Steps for disassembling outdoor unit components like control box, fan, motor, and compressor.
Shows exploded views and lists parts for various indoor unit models.
Shows exploded views and lists parts for various outdoor unit models.
Lists electrical components for indoor unit main and sub PCBs, including part numbers.
Lists electrical components for outdoor unit PCBs, including part numbers.
Shows wiring diagrams for various indoor unit models.
Provides wiring diagrams for various outdoor unit models.
Displays detailed circuit schematics for indoor unit PCBs.
Displays detailed circuit schematics for outdoor unit PCBs.
Explains the function of various PCB circuits in outdoor units.
Illustrates refrigerating cycles for multi-room air conditioner combinations.
Illustrates the layout of main and sub PCBs for indoor units.
Illustrates the layout of main PCBs for outdoor units.
Explains the features and functions of the remote control buttons.
Details basic modes (Auto, Cool) and advanced functions (Turbo, Sleep).
Lists common issues, initial checks, and testing procedures for proper operation.
Provides flows for diagnosing symptoms and error codes.
Details resistance checks for sensors, motors, and other major parts.
Shows the overall system block diagram and component connections.
Guidelines for choosing optimal indoor and outdoor unit installation locations.
Details piping connection, purging, refrigerant refill, and adjustment procedures.
Explains refrigerant adjustment, pipe length impact, and pump down procedures.
Discusses basic refrigeration concepts and the role of air suppliers.
Provides pressure graphs for cooling and heating performance under various conditions.
