Transmitter power cable
(Accessory in the outdoor unit)
Transmitter communication cable
(Accessory in the transmitter)
Terminal Block in the outdoor unit Terminal Block in the outdoor unit
Center
Controller
Outdoor unit PCB
Transmitter
PCB
One housing is used for connection
although there are 2 housings on
the communication cable.
CN59
(White)
Change DIP switch-K2 in all
indoor units PCB (K2 : ON
→→
OFF)
❊ The designs and shape are subject to
change according to the model.
MH068FXEA4/MH080FXEA4 MH18VP2X/MH19VP2X/MH052FXEA2