Samsung Electronics4-11
Disassembly and Reassembly
No Parts Procedure Remark
2
3
Fan
&
Motor
Heat Exchanger
&
Compressor
1) Loosen the fixing nut and detach the Fan.
2) Loosen 4 fixing bolts and detach the
Motor.
3) Loosen 3 fixing bolts and detach the
Bracket Motor.
1) Release the refrigerant at first.
2) Disassemble the Inlet and Outlet Pipe by
welding.
3) Loosen the fixing screw of the
Heat Exchanger.
4) Detach the Heat Exchanger.
5) Loosen 3 nuts of the Compressor.
6) Detach the Compressor.
To Next Page
Loading...
