Media and tray
28
2. Menu overview and basic setup
4
Slide the paper length guide until it lightly touches the end of
the paper stack.
5
Squeeze the paper width guide and slide it to the edge of the
paper stack without causing it to bend.
• Do not push the paper width guide too far causing the
media to warp.
• If you do not adjust the paper width guide, it may cause
paper jams.
• Do not use a paper with a leading-edge curl, it may cause
a paper jam or the paper can be wrinkled.
6
Insert the tray back into the machine.
7
Set the paper type and size for tray 1 (see "Setting the paper
size and type" on page 37).
To Next Page
Loading...
Need help?
General