54
3. Maintenance
Upgrading a memory module
Use this memory module slot to install additional memory.
Order information is provided for additional memory module. (See
"Available accessories" on page 48.)
1
Installing a memory module
1
Turn the machine off and unplug all cables from the machine.
2
Grasp the control board cover and remove it.
3
Remove the memory module from the slot. ( ML-3750ND only)
4
Remove the new memory module from its bag.
5
Holding the memory module by the edges, align the memory
module on the slot at about a 30-degree tilt. Make sure that
the notches of the module and the grooves on the slot fit each
other.
The notches and grooves illustrated above may not match
those on an actual memory module and its slot.
6
Press the memory module into the slot with care until you
hear a ‘click’.
To Next Page
Loading...
