Samsung ML-4500 - Linux Driver Installation

APPENDIX
A.13
This Linux driver is designed for PrinThru compatible
Samsung ML-4500 Series printer and supports Linux Red
Hat 6.0 or higher and Intel Linux. If your Linux version is
not included, this driver might not work properly.
• Install Setup Script file
a. /cdrom/linux/install/install.sh
b. /cdrom/linux/install/ssprt.db
c. /cdrom/linux/install/readme.txt
• Ghostscript Package file
a. /cdrom/linux/gs5.10/ghostscript-5.10-10.i386.rpm
b. /cdrom/linux/gs5.10/COPYING
c. /cdrom/linux/gs5.50/ghostscript-5.50-2.i386.rpm
d. /cdrom/linux/gs5.50/COPYING
Linux Driver Configuration
To install the driver, open the x terminal screen and take the
following steps:
Installation
To mount the CD-ROM drive:
1
Insert the Samsung ML-4500 CD-ROM into the CD-ROM
drive.
2
Mount the CD-ROM drive under a directory like /mnt in
order to access the files on the CD-ROM:
>mount -t iso9660 /dev/cdrom /mnt/cdrom
Note: To mount the CD-ROM drive, you must be a super user
or must be authorized to mount the CD-ROM by the super
user. If you fail to mount the CD-ROM drive, ask the system
administrator.
1. Mount the CD-ROM
drive.
Linux Driver Installation