Samsung ML-4551ND - Page 88

Disassembly and Reassembly
Service Manual
5-29
Samsung Electronics
6. Remove four screws securing the Guide-P-Front.
Then take out the Pick Up Unit, as shown below.
7. Remove two screws securing the Guide-M-Support
and remove it.
8. Remove the Feed1 Ass'y, as shown below.
9. Remove the Feed2 Ass'y, as shown below.
10. Remove four screws securing the Feed2 Unit and
remove it, as shown below.
Guide-M-Support
Guide-P-Front
Guide-M-Support
2
1
Pickup Roller
Ass’y
Bushing Feed
Bearing
Shaft
E-ring
Guide-M-Support
Ground-P-Pickup
2
1
Feed1 Roller
Ass’y
Bearing
Shaft
Pick Up Unit
1
2
3
Feed2 Unit