Samsung ML ML-1630 User Manual

5.1 < Basic printing>
5 Basic printing
This chapter explains common printing tasks. Your machine allows you to
print from various Windows, Macintosh, or Linux applications.
Note
The following procedure is for Windows operating system.
For Linux and Macintosh, see Software section.
Printing a document
The exact steps for printing a document may vary depending on the
application you use.
1 Open the document you want to print.
2 Select Print from the File menu. The Print window is displayed. It
may look slightly different depending on your application.
3 Select your printer driver from the Selet Printer list.
4 To start the print job, click OK or Print in the Print window.
For details about printing, see
Software section .
Canceling a print job
If the print job is waiting in a print queue or print spooler, such as the
printer group in Windows, delete the job as follows:
1 Click the Windows Start menu.
2 For Windows 2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel and than Printers.
3 Double-click the Samsung ML-1630 Series icon.
4 From the Document menu, select Cancel.
Note
You can also access this window by simply double-clicking the
printer icon at the bottom right corner of the Windows desktop.
You can also cancel the current job by pressing on the control
panel.

Samsung ML ML-1630 Specifications

General

Print Technology	Laser
Resolution	1200 x 600 dpi
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Processor	150 MHz
Memory	8 MB
Print Speed	16 ppm
Monthly Duty Cycle	5, 000 pages
Media Sizes Supported	Letter, Legal, Executive, A4, A5, B5
Media Types	Plain, Label, Card, Thick, Bond, Archive
First Page Out	Less than 15 seconds