Samsung ML ML-1630 User Manual

7.5 < Troubleshooting>
10 After removing the jammed paper, check for paper which may be
jammed in other parts of the machine.
11 Slide the toner cartridge back into the machine.
12 Close the top cover firmly. The machine will resume printing.
In the exit area
If paper is jammed in the paper exit area, follow the next steps to release
the jammed paper.
1 Press the top cover lever, completely open the top cover.
2 If a long portion of the paper is visible, pull it straight out.
If there is any resistance removing the paper, stop pulling and go to
step 4.
Caution
Do not touch the fuser inside the machine. It is hot and could
cause burns! The fuser's operating temperature is very hot.
Take care when removing paper from the machine.

Samsung ML ML-1630 Specifications

General

Print Technology	Laser
Resolution	1200 x 600 dpi
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Processor	150 MHz
Memory	8 MB
Print Speed	16 ppm
Monthly Duty Cycle	5, 000 pages
Media Sizes Supported	Letter, Legal, Executive, A4, A5, B5
Media Types	Plain, Label, Card, Thick, Bond, Archive
First Page Out	Less than 15 seconds