Samsung ML ML-1630 User Manual

7.6 < Troubleshooting>
3 Hold the top cover and close it slowly and carefully, until the cover is
securely latched.
Note
If the top cover is not completely closed, the machine will not
operate.
Caution
Be careful not to pinch your fingers , since the top cover is very
heavy.
4 Open the inner cover.
Caution
Do not touch the fuser inside the machine. It is hot and could
cause burns! The fuser's operating temperature is very hot.
Take care when removing paper from the machine.
5 Carefully take the jammed paper out of the machine.
6 Close the inner cover.
7 After removing the jammed paper, check for paper which may be
jammed in other parts of the machine.
8 Close the top cover firmly. The machine will resume printing.
1
inner cover

Samsung ML ML-1630 Specifications

General

Print Technology	Laser
Resolution	1200 x 600 dpi
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Processor	150 MHz
Memory	8 MB
Print Speed	16 ppm
Monthly Duty Cycle	5, 000 pages
Media Sizes Supported	Letter, Legal, Executive, A4, A5, B5
Media Types	Plain, Label, Card, Thick, Bond, Archive
First Page Out	Less than 15 seconds