Samsung ML ML-1630 User Manual

7.2 < Troubleshooting>
4 Align the tray with the slot, and slide it into the machine.
5 Press the top cover lever, completely open the top cover.
6 Hold the top cover and close it slowly and carefully, until the cover is
securely latched.
Note
If the top cover is not completely closed, the machine will not
operate.
Caution
Be careful not to pinch your fingers , since the top cover is very
heavy.
7 If the paper jam LED blinks, go to next step.
8 Open the rear cover.
9 Carefully take the jammed paper out of the machine.
Caution
Do not touch the fuser inside the machine. It is hot and could
cause burns! The fuser's operating temperature is very hot.
Take care when removing paper from the machine.

Samsung ML ML-1630 Specifications

General

Print Technology	Laser
Resolution	1200 x 600 dpi
Input Capacity	150 sheets
Output Capacity	100 sheets
Connectivity	USB 2.0
Processor	150 MHz
Memory	8 MB
Print Speed	16 ppm
Monthly Duty Cycle	5, 000 pages
Media Sizes Supported	Letter, Legal, Executive, A4, A5, B5
Media Types	Plain, Label, Card, Thick, Bond, Archive
First Page Out	Less than 15 seconds